Add me on snap...
luke_raines19
i will give u points

3. (5 points) describe what would be printed by the code below or what error would occur. const char* cstr = "0123456"; const char* ptr = & cstr[4]; cout < < ptr[-1] < < ptr < < endl; 1 4. (5 points) theseus has been trapped in a maze with a minotaur, which is trying to capture him. each round, theseus and the minotaur move through the maze; theseus towards the exit, and the minotaur towards theseus. theseus can move in any of the four cardinal directions, or he can wait for a round to see how the minotaur moves. write code that creates a data type to represent the possible moves that theseus could make.

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Asequential circuit contains a register of four flip-flops. initially a binary number n (0000 ≤ n ≤ 1100) is stored in the flip-flops. after a single clock pulse is applied to the circuit, the register should contain n + 0011. in other words, the function of the sequential circuit is to add 3 to the contents of a 4-bit register. design and implement this circuit using j-k flip-flops.