20. You have a network address of 200.138.1.0 with a subnet mask of 255.255.255.252. Please list the following: number of networks, number of hosts per network, the full range of the first three networks, and the usable address range from those first three networks. Additionally, identify the broadcast addresses for each network.

Answer the following questions regarding your system by using the commands listed in this chapter. for each question, write the command you used to obtain the answer. a. what are the total number of inodes in the root filesystem? how many are currently utilized? how many are available for use? b. what filesystems are currently mounted on your system? c. what filesystems are available to be mounted on your system? d. what filesystems will be automatically mounted at boot time?

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

How to do this programming flowchart?