CSM Tech Publishing has four buildings connected by fiber-optic cabling and 12 subnets connected by several routers running RIPv2. One building has flooded, so employees and their equipment have moved to a temporary building on the same site. A router with three interfaces in the flooded building was also damaged. There are no spare routers, and the router can't be replaced for several days. Five servers running Windows Server 2016 have been moved to the temporary building. One of these servers is available as a spare or for other purposes. What can you do to solve your routing problem? Be specific about how you would carry out your solution, and state whether you would use static or dynamic routing.

The reset circuit used on the four 3-bit counters analyzed in this activity reset the counts to zero (000). it makes sense for the up-counters to start at zero (000), but the down-counters should start at seven (111). what would you need to change so that the 3-bit binary down counter with j/k flip-flops you just created would reset to seven (111)?

What provides an array of buttons for quick access to commonly used commands and tools

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.