subject

A Drop in the Bucket
Write a Windows Form App .NET Framework that:
o Uses Windows Forms to make a graphical interface
o Uses the Graphics object to graphically display a liquid filling a bucket
o Uses a Timer control to display the bucket contents as it fills
o Uses a TrackBar control to adjust the flow-rate of the liquid by setting the Interval of the Timer control
o Uses the ColourDialog control to be able to select which colour the liquid is

ansver
Answers: 2

Other questions on the subject: Computers and Technology

image
Computers and Technology, 22.06.2019 03:00, Jadaflournoy5
Check my work the microprocessor is a(n) circuit, which is designed to process data based on a set of instructions. most desktop and laptop devices contain a microprocessor based on the standard. most tablets and smartphones contain processors based on technology. a microprocessor's circuitry is designed to perform a limited number of tasks contained in its set. during processing, an instruction is loaded into the processor's unit. data is loaded into registers in the processor's where arithmetic and logic operations are performed. microprocessor performance can be measured by its speed. other factors affecting overall processing performance include word size, cache size, and instruction set complexity. most digital devices contain only one microprocessor chip, but today's multi- processors contain circuitry that supports parallel processing. computers contain various kinds of memory. random memory is a special holding area for data, program instructions, and the system. it stores data on a temporary basis until the processor makes a data request. ram is different from disk storage because it is , which means that it can hold data only when the computer power is turned on. computers also contain read- memory, which is a type of non-volatile memory that provides a set of "hard-wired" instructions, called the loader, that a computer uses to boot up.
Answers: 3
image
Computers and Technology, 22.06.2019 08:10, autumnguidry1622
Technician a says that if a valve is open when a piston rises to the very top of a cylinder, the piston may actually strike the valve head and cause serious engine damage. technician b says if the camshaft is located in the engine block, then the engine is called an overhead valve engine, ohv engine, or an in-block camshaft. who is right? a. b only b. both a and b c. a only d. neither a nor b
Answers: 3
image
Computers and Technology, 22.06.2019 11:30, melissalopez12
Write a function so that the main program below can be replaced by the simpler code that calls function original main program: miles_per_hour = float( minutes_traveled = float( hours_traveled = minutes_traveled / 60.0 miles_traveled = hours_traveled * miles_per_hour print('miles: %f' % miles_traveled) sample output with inputs: 70.0 100.0 miles: 116.666667
Answers: 3
image
Computers and Technology, 23.06.2019 05:20, reeeeeee32
What did creator markus “notch" persson initially call his game
Answers: 1
You know the right answer?
A Drop in the Bucket
Write a Windows Form App .NET Framework that:
o Uses Windows Forms to...

Questions in other subjects:

Konu
Mathematics, 24.02.2020 19:42