Write an algorithm that read a number from the user “assuming the number entered is always between 1-100”, when the number entered is greater than 50, a variable X is incremented by 1, otherwise, a variable Y is incremented by 1. After that check the value of X and Y, if X is greater than Y then print (Most of your numbers are greater than 50), otherwise print (Most of your numbers are less than or equals to 50), Hint: the program stops when the user entered number 0

Problems: 1. using textbooks, reference books, and internet as your source of research, draw the following microprocessor microarchitectures i. intel 8086 ii. motorola 68000 i atmel atmega32 iv. mips single cycle v. arm cortex-m3 write an hdl module for a hexadecimal seven-segment display decoder. the input is 4-bit binary representing a hex number (0-f), and the output is 8-bit seven segment display bits (a-h). thus, the decoder must handle the digits 10 - 15 to display a-f respectively, in addition to 0-9 numbers. 2. design a 4-bit left and right rotator (both outputs). first sketch schematic diagrams of your design. then implement your design using hdl coding. 3. 4. design a modified priority encoder that receives an 8-bit input, a7: 0 and produces a 3-bit output, y2o. y indicates the most significant bit of the input that is true. y should be 0 if none of the inputs are true. give a simplified boolean equation, sketch a schematic, and write an hdl code. 5.write an 8: 1 multiplexer module called mux8 with selection inputs s, data input d, and data output y. data input (d) and data output (v) are 32-bit wide

Alocal reaction will occur at the site of the exposure such as irritation or damage to the skin eye or local reaction will occur at the site of the exposure such as irritation or damage to the skin ireland lounges

Which group on the home tab allows you to add shapes to a powerpoint slide?