Find *your* computer's machine epsilon (smallest available precision) for both single and double precision floating point variables so you can use it as a stopping criterion in future iterative computations. To do this, you should write 2 procedures (functions or subroutines) to return the machine epsilon, one for single precision variables, and one for double precision variables. You can refer to the pseudo-code presented in class as a starting point:

epsilon = 1
DO
IF(epsilon + 1 <= 1) EXIT
epsilon = epsilon/2
LOOP
epsilon = 2 * epsilon

What is a rush associated with alcohol?

5. illustrate how fine-line inventory classification can be used with product and market segments. what are the benefits and considerations when classifying inventory by product, market, and product/market?

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to