Give the ASN.1 transfer syntax encoding for the following data types and values. Show integer data values in hex (not binary) format and show characters as text characters. Assume that the integer value is stored in a 4-byte field. Use Figures 7.7 and 7.8 on p. 590 and the relevant Lecture 16 slides as a guide. (10 points)a) The integer 10,120 b) The ASCII text string "Text" c) A SEQUENCE containing the data items in (a) and (b), as follows:Part-c ::=SEQUENCE {myint INTEGER ::= 10120, mytext IA5String ::= "Text"}

Atool that matches persoal skills qualities interests and talets to a career is called a

Consider a direct-mapped cache with 216 words in main memory. the cache has 16 blocks of 8 words each. it is a word-addressable computer (rather than a byte-addressable computer which we normally discuss). (a) how many blocks of main memory are there? (b) what is the format of a memory address as seen by the cache, that is, what are the sizes of the tag, cache block, and block offset fields (if they apply)? (c) to which cache block will the memory reference db6316 map?

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.