Which of the following is the largest aperture opening

a) f/1.7
b) f/2.8
c) f/4
d) f/8
e) f/16

Problems: 1. using textbooks, reference books, and internet as your source of research, draw the following microprocessor microarchitectures i. intel 8086 ii. motorola 68000 i atmel atmega32 iv. mips single cycle v. arm cortex-m3 write an hdl module for a hexadecimal seven-segment display decoder. the input is 4-bit binary representing a hex number (0-f), and the output is 8-bit seven segment display bits (a-h). thus, the decoder must handle the digits 10 - 15 to display a-f respectively, in addition to 0-9 numbers. 2. design a 4-bit left and right rotator (both outputs). first sketch schematic diagrams of your design. then implement your design using hdl coding. 3. 4. design a modified priority encoder that receives an 8-bit input, a7: 0 and produces a 3-bit output, y2o. y indicates the most significant bit of the input that is true. y should be 0 if none of the inputs are true. give a simplified boolean equation, sketch a schematic, and write an hdl code. 5.write an 8: 1 multiplexer module called mux8 with selection inputs s, data input d, and data output y. data input (d) and data output (v) are 32-bit wide

What side length would you specify if you were required to create a regular hexagonal plate that was composed of 33 cm(squared) of sheet metal? dimension the side length to 0.1 cm

The idea that, for each pair of devices v and w, there’s a strict dichotomy between being “in range” or “out of range” is a simplified abstraction. more accurately, there’s a power decay function f (·) that specifies, for a pair of devices at distance δ, the signal strength f(δ) that they’ll be able to achieve on their wireless connection. (we’ll assume that f (δ) decreases with increasing δ.) we might want to build this into our notion of back-up sets as follows: among the k devices in the back-up set of v, there should be at least one that can be reached with very high signal strength, at least one other that can be reached with moderately high signal strength, and so forth. more concretely, we have values p1 ≥ p2 ≥ . . ≥ pk, so that if the back-up set for v consists of devices at distances d1≤d2≤≤dk, thenweshouldhavef(dj)≥pj foreachj. give an algorithm that determines whether it is possible to choose a back-up set for each device subject to this more detailed condition, still requiring that no device should appear in the back-up set of more than b other devices. again, the algorithm should output the back-up sets themselves, provided they can be found.\