subject

Atechnician is checking the operation of the electronic throttle control (etc) system using a factory or factory-level scan tool. to perform this test on a chrysler vehicle, you would use the "throttle follower test" as shown on the scan tool. which of the following is needed to perform this process? a. an assistant to check that the throttle plate is moving b. nothing—the throttle will perform a self-test by closing and then opening. c. a running engine d. an assistant to hold open the throttle plate

ansver
Answers: 3

Other questions on the subject: Computers and Technology

image
Computers and Technology, 22.06.2019 03:30, raytaylorh010801
Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo. i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the “stub-end” fault.
Answers: 2
image
Computers and Technology, 22.06.2019 10:30, ghazanfarwaheed7967
Auniversity wants to install a client-server network. which feature do you think is important for them as they set up the network? sending email blocking multiple people to use the same file low security low set up cost limited access to files
Answers: 1
image
Computers and Technology, 22.06.2019 20:00, jroy1973
Awide variety of “ apps “ are available to customize devices. which category of app does the word processing software fall into?
Answers: 2
image
Computers and Technology, 23.06.2019 01:50, akornegay2
Write a program that uses a random number generator to generate a two digit positive integer and allows the user to perform one or more of the following operations: a. double the number. b. reverse the digits of the number. c. raise the number to the power of 2, 3, or 4. d. sum the digits of the number. e. if the number is a two-digit number, then raise the first digit to the power of the second digit. f. if the number is a three-digit number and the last digit is less than or equal to 4, then raise the first two digits to the power of the last digit. after performing an operation if the number is less than 10, add 10 to the number. also, after each operation determine if the number is prime. each successive operation should be performed on the number generated by the last operation. your program should not contain any global variables and each of these operations must be implemented by a separate function. also, your program should be menu driven. 7. (fraction calculator) write a program that
Answers: 1
You know the right answer?
Atechnician is checking the operation of the electronic throttle control (etc) system using a factor...

Questions in other subjects:

Konu
Mathematics, 18.01.2021 07:50
Konu
English, 18.01.2021 07:50