Ahardware compatibility list recommends striping with double parity as storage for an application. in a test environment, a technician realized that a different raid level can be used to compensate for a limited number of available disks. which of the following is the closest raid level the technician should deploy while minimizing the number of disks and maintaining fault tolerance.

RAID level 5 can be used to compensate a limited number of available disks.

Explanation:

There are two type of RAID

Software RAID

deliver services form the host.

Hardware RAID

provides hardware services.

RAID has levels

0, 1, 5, 6, and 10

RAID 0, 1, and 5 work on both HDD and SSD media,

4 and 6 also work on both media.

RAID 0 :Striping

In this level minimum of two disks,RAID 0 split the file strip the data.Multiple hard drive are used to split the data.

RAID 1 : Mirroring

In this level Minimum two disk require and provide data tendency.

RAID 5 :Stripping with parity

Parity is a binary data.RAID system calculate the value which system used to recover the data.

Most RAID system with parity function store parity blocks.

RAID 5 combines the performance of RAID 0 with redundancy of RAID 1.

RAID 5 level should minimize the fault tolerance.

leaning back,   no eye contact,   fidgeting in the seat

given the lack of choices, i'm gonna wing it and say that pushing your car off a cliff might not be the best idea. your car might sustain damage from the fall and will probably result in the car being too damaged to jump start.

if that's not good enough, avoid filling the car with bees. bees might get agitated when trapped or during the moving process, and might result in death or painful stings that will make jump starting your car very difficult. but in the event that you do choose to fill your car with bees, remember to wear protective gear!