subject

Adlx compiler wants to perform a conditional branch of the form ‘beqz rx, long_disp’, where long_disp is a 26-bit pc-relative displacement constant. unfortunately in dlx, conditional branch displacements are restricted to 16 bits, so this is not directly possible. write a sequence of dlx instructions that effectively perform a 26-bit pc-relative branch to long_disp. (hint: use the j unconditional jump instruction as part of your sequence. it allows for displacements up to 26 bits.)

ansver
Answers: 2

Other questions on the subject: Computers and Technology

image
Computers and Technology, 21.06.2019 22:00, karena13aguirre
Problems: 1. using textbooks, reference books, and internet as your source of research, draw the following microprocessor microarchitectures i. intel 8086 ii. motorola 68000 i atmel atmega32 iv. mips single cycle v. arm cortex-m3 write an hdl module for a hexadecimal seven-segment display decoder. the input is 4-bit binary representing a hex number (0-f), and the output is 8-bit seven segment display bits (a-h). thus, the decoder must handle the digits 10 - 15 to display a-f respectively, in addition to 0-9 numbers. 2. design a 4-bit left and right rotator (both outputs). first sketch schematic diagrams of your design. then implement your design using hdl coding. 3. 4. design a modified priority encoder that receives an 8-bit input, a7: 0 and produces a 3-bit output, y2o. y indicates the most significant bit of the input that is true. y should be 0 if none of the inputs are true. give a simplified boolean equation, sketch a schematic, and write an hdl code. 5.write an 8: 1 multiplexer module called mux8 with selection inputs s, data input d, and data output y. data input (d) and data output (v) are 32-bit wide
Answers: 3
image
Computers and Technology, 22.06.2019 21:00, depression4eternity
The average cost of one year at a private college in 2012-2013 is $43,289. the average grant aid received by a student at a private college in 2012-2013 is $15,680.   what is the average student contribution for one year at a private college in 2012-2013?
Answers: 3
image
Computers and Technology, 23.06.2019 01:50, rhonda45801
Free points just awnser this. what should i watch on netflix
Answers: 2
image
Computers and Technology, 23.06.2019 09:30, shadowsnake
Write a function called checkfactor that takes two arrays of positive numbers, firstnumberrow and secondnumberrow. checkfactor checks if the first entry in firstnumberrow is divisible by the first entry in secondnumberrow, and performs the same operation on the next array elements until all entries have been checked. all the numbers are positive and the number of entries in the arrays are the same. the function should return the identified divisible numbers in two row arrays named firstdivisible and seconddivisible. restrictions: branches or loops should not be used. the code must use the internal mod and logical functions. hint: the mod function should be used to determine if two numbers are divisible. ex: for num1 and num2 if mod(num1,num2) is 0, then the two numbers are divisible. this is matlab
Answers: 2
You know the right answer?
Adlx compiler wants to perform a conditional branch of the form ‘beqz rx, long_disp’, where long_dis...

Questions in other subjects:

Konu
Mathematics, 02.10.2020 15:01
Konu
Physics, 02.10.2020 15:01