Assume that we would like to expand the mips register file to 128 registers and expand the instruction set to contain four times as many instructions.
2.18.1 [5] < §2.5> how this would this affect the size of each of the bit fields in the r-type instructions?
2.18.2 [5] < §2.5> how this would this affect the size of each of the bit fields in the i-type instructions?
2.18.3 [5] < §§2.5, 2.10> how could each of two propose changes decrease the size of an mips assembly program? on the other hand, how could the proposed change increase the size of an mips assembly program?

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

What provides an array of buttons for quick access to commonly used commands and tools

Animations and transitions are added from the