The purpose of this problem is to write some small functions and practice passing things around amoung functions.1) the main function shall ask the user to enter three numbers and read the three numbers.2) write a function named findsum that takes three numbers as arguments and returns their sum. the main function shall call this function.3) write a function named findaverage that takes the sum and the number of numbers and returns the average. the main function shall call this function.4) write a function named findsmallest that takes the three numbers and returns the smallest value. the main function shall call this function.5) the main function shall print the results in the following format, with two decimal positions and the decimal points aligned:

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?