5. why would you want to wear white or light colors on a summer day?
a. white absorbs all light and reflects none so it is cooler.
b. white reflects all light and absorbs none so it is cooler
c. white refracts all light and so it is cooler.
d. light colors look nice on a summer day.

The reset circuit used on the four 3-bit counters analyzed in this activity reset the counts to zero (000). it makes sense for the up-counters to start at zero (000), but the down-counters should start at seven (111). what would you need to change so that the 3-bit binary down counter with j/k flip-flops you just created would reset to seven (111)?

Design a pos circuit that displays the letters a through j on a seven-segment indicator. the circuit has four inputs w, x, y, and z which represent the last 4 bits of the uppercase ascii code for the letter to be displayed. thus, if wxyz = 0001 then "a" will be displayed. (any answer with 22 or fewer gates and inverters, not counting any for the inputs, is acceptable)

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?