Describe a laboratory procedure that can be used to recover the solid solute from the aqueous solution.

Two common laboratory procedures that can be used to recover the solid solute from the aqueous solution are crystallization and evaporation.

An aqueous solution contains a solute dissolved in water. If the solute is a solid, it can be recovered by the following laboratory procedures;

To carry out crystallization, the vessel could be seeded with some crystals to aid formation of more crystals. The solution could also be cooled to enable crystallization. Sometimes, the vessel may be scratched to enable the crystals to form.

Evaporation is done using an open dish placed on a Bunsen burner. The dish containing the solution is placed on the burner and heated until the solvent completely escapes and the solid solute is recovered.

Learn more: link

1. the question asks the most appropriate, which seems to rule out "all of the above." your choice appears to be the correct one.

2. the protocol described is good for identifying correlation, but not cause and effect. for cause/effect, you need to devise a protocol that will assign the treatment (or not) to groups that have essentially the same "demographics" with respect to all the other variables. your choice regarding control group seems appropriate. random assignment of treatment (choice d) may be appropriate also. (i think you can argue that b and d are just different descriptions of the same method.)

3. d will randomize the birds, but may not guarantee there are 10 in each group. e will do both, so seems the better choice.

comment on question 2

based on the problem statement, it seems clear that confident, attentive drivers are more likely to use daytime running lights. so, the protocol might need to be devised in such a way that the lights would be turned on or off without the driver's knowledge. (an attentive driver will figure it out.) assigning a confident, attentive driver to a group required to drive without running lights might mess with his/her confidence and attentiveness. you don't want your experiment to do that. (nor do you want the experiment to subject a driver to greater risk of accident as a consequence of driving without running lights.) experiments involving human safety are always problematic.

it is a solid

explanation: