Chemistry, 10.10.2019 02:00 laiba012305

Which solid will be more soluble in water, the one with the larger lattice energy or the one with the smaller lattice energy? assume that solute-solvent interactions are the same for both solids?

Answers: 3

Show answers

Answers

Lattice energy is the amount of energy expelled when the solid is disintegrated into ions. For example, the solid is Sodium Chloride. In ionic form, that would consist of sodium and chlorine ions.The solid with a smaller lattice energy would be easily disrupted, hence, when a solvent is incorporated, the solid becomes solvated ions.

Answer from: Quest

The activity series is shown in the attached picture. if the element is below the other, then you can displace the other. following the activity series as a guide, the reactions are as follows: nickel and aluminum chloride3 ni + 2 alcl₃ → 3 nicl₂ + 2 albarium and copper bromideba + cubr → no reaction because cu is less oxidizable than bapotassium nitrate and aluminum3 kno₃ + al → al(no₃)₃ + 3 ksodium phosphate and zincnaso₄ + zn → znso₄ + na

Answer from: Quest

the missing options are :

(1) lower boiling point and a lower freezing point(2) lower boiling point and a higher freezing point(3) higher boiling point and a lower freezing point(4) higher boiling point and a higher freezing point

answer : the correct answer is option (3) higher boiling point and a lower freezing point

explanation :

when a non volatile solute is added to a solvent like water, it results in elevation of boiling point.

let us find the increase in boiling point of water when cacl₂ is added to water to make a solution of 1 m

step 1 : find molality of the solution

let us assume we have 1 l of solution.

$m = \frac{moles (solute)}{l ( solution)}$

$1 m = \frac{moles (cacl_{2})}{1 l }= 1 mol cacl_{2}$

let us convert this to grams of cacl₂.

molar mass of cacl2 is 111 g/mol

grams of cacl₂ = $1 mol \times \frac{111g}{mol} = 111 g cacl_{2}$

mass of solute = 111 g

assuming density of solution same as water which is 1g/ml we have ,

mass of solution = density * volume

mass of solution = $\frac{1g}{ml} \times 1000 ml = 1000 g$

mass of solution = mass of solvent + mass of solute

mass of solute = 1000g - 111g

mass of solute 889 g = 0.889 kg

the molality of the solution can be calculated as

$molality = \frac{mol (solute)}{kg ( solvent)}$

$molality = \frac{1mol}{0.889kg}$

molality = 1.12 m

step 2 : find boiling point elevation.

the elevation in boiling point is calculated as

$\bigtriangleup t_{b} = i \times k_{b} \times m$

here δtb = boiling point elevation

i = vant hoff factor which is the number of ions formed by the solute .

cacl₂ dissociates as $cacl_{2} \rightarrow ca^{2+} + 2 cl^{-}$

it forms 3 ions . therefore,

i = 3

m = molality which is 1.12 m

kb is constant for a given solvent. for water it is 0.512

$\bigtriangleup t_{b} = 3 \times 0.512 \times 1.12$

$\bigtriangleup t_{b} = 1.7$

the boiling point of water increases by 1.7 °c

step 3: find freezing point depression.

when a non volatile solute is added to water, it results in decrease in freezing point.

the formula to find freezing point depression is

$\bigtriangleup t_{f} = i \times k_{f} \times m$

kf is constant for water and its value is 1.86

$\bigtriangleup t_{f} = 3 \times 1.86 \times 1.12$

$\bigtriangleup t_{f} = 6.2$

the freezing point of water decreases by 6.2 °c

therefore we can say that, the solution will have a higher boiling point and a lower freezing point

Other questions on the subject: Chemistry

Chemistry, 21.06.2019 13:50, iloveballet1857

The electron configuration for chromium is 1 s 2 2 s 2 2 p 6 3 s 2 3 p 6 3 d 5 4 s 1 instead of 1 s 2 2 s 2 2 p 6 3 s 2 3 p 6 3 d 4 4 s 1 . the configuration is an exception to the

Answers: 3

continue

Chemistry, 21.06.2019 21:30, CourtGard

Aphysical reaction is a process in which one or more reactants change into one or more products with different properties. select the best answer from the choices provided t f

Answers: 1

continue

Chemistry, 22.06.2019 00:30, bryneosburn

Lem 2 the data below are for the system ethyl propyl ether (1)-chloroform (2) at 0.5 bar. use the data to answer the following questions (all questions refer to p d 0: 5 bar). a) what are the boiling points of the pure components at 0.5 bar? b) a mixture with the overall composition z1 d 0: 1 is brought to 47.6ä±c, 0.5 bar. what is the phase? c) 100 mole of a mixture with z1 d 0: 1 (state a) is mixed with 22 mole of pure ethyl propyl ether vapor (state b). the mixing takes place at 47.6 ä±c, 0.5. bar. what is the phase of the resulting mixture (state c)? if the state is a v/l mixture report the number of moles and mole fractions in each phase. d) plot the txy graph and show states a, b and c. the graph must be done by computer and should be properly annotated. ethyl propyl ether (1) - chloroform (2) at 0.5 bar t ( ä±c) x1 y1 t ( ä±c) x1 y1 42.9 0.000 0.000 49.0 0.470 0.455 43.0 0.020 0.010 49.1 0.520 0.520 43.9 0.065 0.029 48.9 0.567 0.592 45.4 0.156 0.089 48.3 0.652 0.720 46.4 0.215 0.142 47.6 0.745 0.815 47.6 0.296 0.223 46.7 0.822 0.872 48.3 0.362 0.302 45.7 0.907 0.937 48.7 0.410 0.375 44.6 1.000

Answers: 3

continue

Chemistry, 22.06.2019 13:00, soapai

Imagine that you push on a large rock. at what point does your effort change the rock’s mechanical energy?

Answers: 1

continue

You know the right answer?

Which solid will be more soluble in water, the one with the larger lattice energy or the one with th...