A

l + 6 n

ao

h

> 2 n

a

3

alo

3

+ 3 h

Solution:

1) Separate out the half-reactions. The only issue is that there are three of them.

How did I recognize there there were three equations? The basic answer is "by experience." The detailed answer is that I know the oxidation states of all the elements on EACH side of the original equation. By knowing this, I am able to determine that there were two oxidations (the Fe going +2 to +3 and the S going -2 to +6) with one reduction (the N going +5 to +2).

Notice that I also split the FeS apart rather than write one equation (with FeS on the left side). I did this for simplicity showing the three equations. I know to split the FeS apart because it has two "things" happening to it, in this case it is two oxidations.

Normally, FeS does not ionize, but I can get away with it here because I will recombine the Fe2+ with the S2¯ in the final answer. If I do everything right, I'll get a one-to-one ratio of Fe2+ to S2¯ in the final answer.

2) Balancing all half-reactions in the normal manner.

3) Equalize the electrons on each side of the half-reactions. Please note that the first two half-reactions (both oxidations) total up to nine electrons. Consequently, a factor of three is needed for the third equation, the only one shown below:

Adding up the three equations will be left as an exercise for the reader. With the FeS put back together, the sum of all the coefficients (including any that are one) in the correct answer is 15.

Problem #2: CrI3 + Cl2 ---> CrO42¯ + IO4¯ + Cl¯ [basic sol.]

Solution:

Problem #3: Sb2S3 + Na2CO3 + C ---> Sb + Na2S + CO

Solution:

1) Remove all the spectator ions:

Notice that I did not write Sb3+. I did this to keep the correct ratio of Sb as reactant and product. It also turns out that it will have a benefit when I select factors to multiply through some of the half-reactions. I didn't realize that until after the solution was done.

2) Separate into half-reactions:

3) Balance as if in acidic solution:

4) Use a factor of three on the second half-reaction and a factor of six on the third.

5) The answer (with spectator ions added back in):

6) Here's a slightly different take on the solution just presented.

7) Here's a discussion of a wrong answer to the above problem.

However, after reading the above wrong answer example, look at problem #10 below for an instance of having to add in a substance not included in the original reaction.

Problem #4: CrI3 + H2O2 ---> CrO42¯ + IO4¯ [basic sol.]

Solution:

1) write the half-reactions:

I wrote the iodide as I33¯ to make it easier to recombine it with the chromium ion at the end of the problem.

2) Balance as if in acidic solution:

I used water as the product for the hydrogen peroxide half-reaction because that gave me a half-reaction in acid solution. It will all go back to basic at the end of the problem.

3) Recover CrI3 by combining the first two half-reactions from just above:

4) Equalize the electrons:

5) Add the half-reactions together. Strike out (1) electrons, (2) hydrogen ion and (3) water. The result:

6) Add 10 hydroxides to each side. This makes 10 more waters on the right, so combine with the water alreadyon the right-hand side to make 32:

1.43 x 10^-11 j the guy commented the awnser just making sure u see it .

a gas, having a molecular weight of 13 kg/kmol and a kinematic viscosity of 0.25 cm2/s, flows through a pipe 0.25 m internal diameter and 5 km long at the rate of 0.4 m3/s and is delivered at atmospheric pressure.