Chemistry, 15.10.2020 20:01 khynia11

Identify and give an example of at least two molecular properties that could be used to separate a substance from a mixture.

Answers: 3

Show answers

Answers

Two molecular properties that could be used to separate a substance from a mixture are - Filtration and Chromatography .

Explanation

Molecular property -Molecular properties include the chemical properties, physical properties, and structural properties of molecules, including medicines. Typically, molecular properties do not include a chemical compound's pharmacological or biological properties.

Filtration -: Using a filter medium that allows the fluid to move through but not the solid, filtration is a method used to distinguish solids from liquids or gases. The term 'filtration' refers whether the filter is mechanical, chemical, or physical. The filtrate is considered the fluid that flows through the filter. A surface filter, which is a solid that traps solid particles, or a depth filter, which is a bed of material that traps the solid, may be the filter medium.

Usually, filtration is an imperfect operation. On the feed side of the filter or embedded in the filter media, some fluid remains and some tiny solid particles make their way through the filter.

example - Filters containing fibers that trap particulates are used by many aquariums.

Chromatography -: A laboratory method for the isolation of a mixture is chromatography. The mixture is dissolved in a fluid called the mobile phase (gas, solvent, water) that carries it through a device (a column, a capillary tube, a plate, or a sheet) on which a material called the stationary phase is fixed. For the stationary step, the different constituents of the mixture have different affinities.

Chromatography can be analytical or preparatory. Preparative chromatography is intended to isolate the components of a mixture for subsequent use and is therefore a method of purification. Analytical chromatography is usually conducted with smaller quantities of material and is intended to assess the presence of analytes in a mixture or to measure their relative proportions. Both are not limited to each other.

An example of chromatography is when a chemical reaction is used to separate each of the various sized molecules on a piece of paper in a liquid compound into their own pieces.

Hence , the answer is filtration and chromatography .

Answer from: Quest

the density of gold = 19.3 g/cm3

the relation between density and mass and volume is

density = mass / volume

given :

mass of gold = 13 g

density = 13g / volume = 19.3

volume = 13 /19.3 = 0.67 cm^3

thus volume of gold nugget = 0.67 cm^3

Answer from: Quest

Thermohaline circulation and gyres

Other questions on the subject: Chemistry

Chemistry, 22.06.2019 21:30, leenzazou587

Liquid ammonia is produced at high temperatures and under great pressure in a tank by passing a mixture of nitrogen gas and hydrogen gas over an iron catalyst. the reaction is represented by the following equation. n2(g) + 3h2(g) → 2nh3(g) changing all but one experimental condition will affect the amount of ammonia produced. that condition is a) increasing the concentration of both reactants b) changing the temperature within the tank c) decreasing the pressure within the tank. d) increasing only the amount of nitrogen present.

Answers: 1

continue

Chemistry, 22.06.2019 23:00, 1315055427

Which subshell is represented by the actinides family?

Answers: 1

continue

Chemistry, 23.06.2019 06:00, bvbbridesmaid5519

Is the flow of energy during vaporizing more like the flow during melting or during freezing

Answers: 1

continue

Chemistry, 23.06.2019 07:30, isalih7256

In the diagram here that represents the reaction, which reactant, a or b, is the limiting reagent?