Chemistry, 26.09.2020 01:01 TightKnowsDaWhey

When Boiling water, bubbles start to appear in the water and a gas rises from the surface. In 5 complete sentences, explain whether this is a physical or chemical change and WHY.

Answers: 1

Show answers

Answers

Answer from: mary12369

Explanation:

Boiling is the rapid vaporization of a liquid, which occurs when a liquid is heated to its boiling point, the temperature at which the vapour pressure of the liquid is equal to the pressure exerted on the liquid by the surrounding atmosphere. There are two main types of boiling: nucleate boiling where small bubbles of vapour form at discrete points, and critical heat flux boiling where the boiling surface is heated above a certain critical temperature and a film of vapor forms on the surface. Transition boiling is an intermediate, unstable form of boiling with elements of both types. The boiling point of water is 100 °C or 212 °F but is lower with the decreased atmospheric pressure found at higher altitudes.

Boiling water is used as a method of making it potable by killing microbes and viruses that may be present. The sensitivity of different micro-organisms to heat varies. But if water is held at 100 °C (212 °F) for one minute, most micro-organisms and viruses are inactivated. Ten minutes at a temperature of 70 °C (158 °F) is also sufficient for most bacteria.

Boiling water is also used in several cooking methods including boiling, steaming and poaching.

Answer from: Quest

first let us lay out the formula for potential

and kinetic energy:

pe = mgh

ke = (mv^2)/2

where: m=mass, v=velocity, g=gravitational

acceleration, h=height

calculating for mass using the known values of

pe:

340j = m (9.81 m/s^2) (50ft) (1m/3.28ft)

m = 2.27 kg

the law of conservation of energy states that

energy is neither created nor destroyed. therefore, the change in kinetic

energy from 50 ft to 35 ft would be equal to the change in potential energy

from 50 ft to 35 ft. however it would be opposite in signs since one is losing

while other is gaining.

ke(35ft) – ke(50ft) = - [ pe(35ft) – pe(50ft]

ke(50ft) = 0 since the brick is initially at rest

ke(35ft) = 340j - 2.27kg (9.81 m/s^2) (35ft)

(1m/3.28 ft)

ke(35ft)

= 102.38 j

Answer from: Quest

Answerthe half-reaction having the greatest tendency to occur at the anode: i₂(aq) + 2e⁻ ⇄ 2i⁻ ; e = +0.53 v====== $\begin{aligned} \text{i}_2\text{\footnotesize (aq)}+2\,\text{e}^{-} & \rightleftharpoons 2\,\text{i}^{-}\text{\footnotesize (aq)}& \text{e} & = +0.53\text{ v} \\ \text{co}^{3+}\text{\footnotesize (aq)} + \text{e}^{-} & \rightleftharpoons \text{co}^{2+}\text{\footnotesize (aq)} & \text{e} & = +1.80\text{ v} \\ \text{o}_2\text{\footnotesize (g)}+4\,\text{h}^{+}\text{\footnotesize (aq)} + 4\,\text{e}^{-} & \rightleftharpoons 2\,\text{h}_2\text{o}\text{\footnotesize(l)}& \text{e} & = +1.23\text{ v} \\ \end{aligned}$ oxidation occurs at the anode. we must therefore find the half-reaction with the greatest tendency to oxidize.the given values of e are reduction potentials (the form of the half-reactions are of reduction).the lower the reduction potential, the higher the potential to oxidize. the half-cell with the lowest reduction potential will have the greatest tendency to oxidize at the anode.the half-reaction having the greatest tendency must be i₂(aq) + 2e⁻ ⇄ 2i⁻ e = +0.53 vbecause its reduction potential is the lowest out of the three.

Other questions on the subject: Chemistry

Chemistry, 22.06.2019 05:20, jtingley0502

Temperature is _related to the average kinetic energy of a gas. inversely directly not disproportionally

Answers: 1

continue

Chemistry, 22.06.2019 08:30, Aggie9341

The mass of a neutron is equal to the mass of a proton plus the mass of an electron. true or false false true

Answers: 1

continue

Chemistry, 22.06.2019 09:30, pettitchristy1

What is the mass of 0.46 mil of mgcl2

Answers: 2

continue

Chemistry, 22.06.2019 13:30, xojade

Which statements are true concerning mineral formation? check all that apply. the slower the cooling, the larger the crystals. the faster the cooling, the smaller the crystals. crystals formed from magma are smaller than crystals formed from lava. minerals can only form in solutions when the solution is heated deep underground. when a solution cools, elements and compounds leave the solution and crystallize as minerals. minerals formed from hot water solutions can form narrow channels in the surrounding rock.

Answers: 1

continue

You know the right answer?

When Boiling water, bubbles start to appear in the water and a gas rises from the surface. In 5 comp...