Heat that flows by conduction is the transfer of thermal energy between substances in contact. What must occur for this to happen?
The two systems must be the same temperature.
The two systems must not be touching each another.
One system must have higher kinetic energy than the other system.
The thermal energy of one system must be the same as the thermal energy of the other system.
Marls this and return
Save and Exit
Mers
Submit
e

part 1: the half-life of the element is 22 years.

part 2: it will take 132.02 year for the sample to decay from 308.0 g to 4.8125 g.

explanation:

part 1: there are two ways to determine the half life time.

first way: the half life time can be determined directly from its definition as it is the time required for the sample to decay to its half concentration.

from the data the initial concentration was 45.0 g and decayed to its half value (22.5 g) in 22.0 years.

second way: the radio active decay is considered first order reaction so we can use the laws of first order reactions.

k = (1/t) ln (a/a-x), where k is the rate constant of the reaction,

t is the time of the reaction

a is the initial concentration of the reactant

a-x is the remaining concentration at time (t)

a = 45.0 g the initial concentration at t = 0 year.

at t = 22 year, a-x = 22.5 g

then k = (1/22 year) ln (45.0 g/ 22.5 g) = 0.0315 year-1.

the half-life time (t1/2) = ln 2/ k = 0.693/ k =0.693/ 0.0315 = 22 years.

part 2:

using the same law k = (1/t) ln (a/a-x),

using the given data; a = 308.0 g and a-x = 4.8125 g and the calculated k from the part 1 (k = 0.0315 year-1)

t = (1/k) ln (a/a-x) = (1/0.0315) ln (308.0/ 4.8125) = 132.02 years

a mercury barometer is a device that uses the physical properties of mercury in a tube to measure barometric pressure. mercury barometers are used for : -

1. measurement of atmospheric pressure  

2. determining the altitude of a place

3. weather forecasting

4. calibration and checking of aneroid barometers

5. application in fluid mechanics

6. measurement of pressure in aircrafts

7. surface weather analysis

8. preparation of barographs

9. usage in physical sciences like physics, astronomy & chemistry

10. preparation of aircraft altimeters

characteristics of mercury barometer : -

1.used to define and measure atmospheric pressure.

2.on the average at sea level the column of mercury rises to a height of about 760 mm.

3.this quantity is equal to 1 atmosphere.

4.it is also known as standard atmospheric pressure.

5.a barometer in which the weight of a column of mercury in a glass tube with a sealed top is balanced against that of the atmosphere pressing on an exposed cistern of mercury at the base of the mercury column, the height of the column varying with atmospheric pressure.

indicate valleys, hills, steepness and gentleness of slopes.

explanation:

contour lines on a map indicate elevation, or depth. numeric notations on contour lines refer to the level of elevation, or height about sea level.