A mixture of n n-hexane vapor and air leaves a solvent recovery unit and flows through a 70-cm diameter duct at a velocity of 3.00 m/s. At a sampling point in the duct the temperature is 40°C, the pressure is 850 mm Hg, and the dew point of the sampled gas is 25°C. The gas is fed to a condenser in which it is cooled at constant pressure, condensing 70% of the hexane in the feed. Perform a degree-of-freedom analysis to show that enough information is available to calculate the required condenser outlet temperature (°C) and cooling rate (kW). Perform the calculations. If the feed duct diameter were 35 cm for the same molar flow rate of the feed gas, what would be the average gas velocity (volumetric flow rate divided by cross-sectional area)? Suppose you wanted to increase the percentage condensation of hexane for the same feed stream. Which three condenser operating variables might you change, and in which direction?