Using the erlenmeyer flask and its contents from part a, continue with these steps:

heat the flask on a hot plate or in a microwave oven. gently swirl the flask at regular intervals until the crystals of sodium acetate dissolve completely.
make sure that all the sodium acetate is dissolved and no crystals remain inside the flask. once all the crystals are dissolved, remove the flask from the heat. to avoid burns, be careful when working with the hot plate and while handling the hot flask.
allow the flask to cool for at least 30 minutes on a heat-resistant surface without disturbing it. the flask should now be at or near room temperature.
before it was heated, the flask and its contents were at room temperature. with regard to appearance, how are the contents of the flask different from before they were heated and cooled?

Lem 2 the data below are for the system ethyl propyl ether (1)-chloroform (2) at 0.5 bar. use the data to answer the following questions (all questions refer to p d 0: 5 bar). a) what are the boiling points of the pure components at 0.5 bar? b) a mixture with the overall composition z1 d 0: 1 is brought to 47.6ä±c, 0.5 bar. what is the phase? c) 100 mole of a mixture with z1 d 0: 1 (state a) is mixed with 22 mole of pure ethyl propyl ether vapor (state b). the mixing takes place at 47.6 ä±c, 0.5. bar. what is the phase of the resulting mixture (state c)? if the state is a v/l mixture report the number of moles and mole fractions in each phase. d) plot the txy graph and show states a, b and c. the graph must be done by computer and should be properly annotated. ethyl propyl ether (1) - chloroform (2) at 0.5 bar t ( ä±c) x1 y1 t ( ä±c) x1 y1 42.9 0.000 0.000 49.0 0.470 0.455 43.0 0.020 0.010 49.1 0.520 0.520 43.9 0.065 0.029 48.9 0.567 0.592 45.4 0.156 0.089 48.3 0.652 0.720 46.4 0.215 0.142 47.6 0.745 0.815 47.6 0.296 0.223 46.7 0.822 0.872 48.3 0.362 0.302 45.7 0.907 0.937 48.7 0.410 0.375 44.6 1.000

In the following redox reaction which is the oxidizing agent and which is the reducing agent? alcl3 + na nacl + al

Identify one disadvantage to each of the following models of electron configuration: -dot structures -arrow and line diagrams -written electron configurations type in your answer below. (answer) -dot structures do not show the distribution of electrons in orbitals and take up a lot of space. -arrow and line diagrams take up a lot of space and make it difficult to count electrons. -written configurations make it easy to lose count of electrons and do not show the distribution of electrons in orbitals.