Suppose the distribution coefficient of component a in a binary system is 20. according to the hill-malisoff method, the mass ratio, ma/mb, for optimal solubility precision is 20: 1. of a 10ml graduated cylinder is used in the experiment, the smaller volume contained in each tube is less than .5 ml. does this correspond to maximal volumetric precision? how do you decide how to achieve the maximal overall experimental accuracy in an experiment such as this?

Oh nskskakaaka

It conforms what ever surface its in.

The answer to your question really depends on three things: how much water you have, how cold it is to start out, and how cold the things around it are. water actually freezes when it gets to 32 degrees fahrenheit (0 degrees celsius), but the time it takes to get there may be different.  let's start with the first. if you take two glasses, and fill one with a tiny bit of water, and the other about halfway, then put them both in the freezer, the one with less water will freeze first (you can try this at home, but i recommend using plastic cups and not glass ones).  now let's move on to the second part. let's say you have two glasses, and you fill one with really cold water that has been in the refrigerator, and the other with really hot water from the sink. if you put both of them in the freezer, the one that started out colder will freeze first.  for the third part, let's imagine that you have two glasses with the same amount of water in them, and the water is at the same temperature. imagine putting one outside on a really really cold day in georgia, and having a friend in alaska put one outside on the same day. since it would be so much colder in alaska, the glass of water there would freeze before yours.  so, if you took a tiny bit of really cold water in a glass, and put it outside on a cold day in alaska, it would freeze a lot faster than a big glass of hot water outside on a cold day in georgia. 

The total number of nucleons