Chemistry, 06.10.2019 04:30 michellestepp2001
Multi-stage flash distillation is used to desalinate seawater so it is fit for human consumption. a flash distillation tank is composed of small chambers (called \"stages\"), each at a lower pressure than the previous stage. salt water enters the first chamber, some fresh water flash evaporates, condenses, and is removed from the distillation tank. the remaining salt water moves to the next chamber, some fresh water flash evaporates, condenses, and is removed from the distillation tank. the remaining salt water moves to the next chamber, and the process repeats until very salty water is expelled as waste. brine that is 35,000 ppm salt is desalinated through a 5-stage flash distillation process. the pressure in the stages is such that 8% by mass of the water entering the stage evaporates and leaves as fresh water. if the desalination plant wants to produce 1400.0 gallons of drinking water per day, how many gallons of brine must the plant take in per day? the density of fresh water is 1.000 g/cm3. the density of brine is 1.025 g/cm3.
Answers: 1
Other questions on the subject: Chemistry
Chemistry, 22.06.2019 05:30, fgcherubin
What happens to the atomic radius when an elctron is lost
Answers: 1
Chemistry, 22.06.2019 13:00, rome58
Lab reagent, hypothesis test. a reference solution used as a lab reagent is purported to have a concentration of 5 mg/dl. six samples are taken from this solution and the following concentrations are recorded: (5.32, 4.88, 5.10, 4.73, 5.15, 4.75) mg/dl. these six measurements are assumed to be an srs of all possible measurements from solution. they are also assumed to have a standard deviation of 0.2, a normal distributin, and a mean concentration equal to the true concentration of the solution. carry out a significance test to determine whether these six measurements provide reliable evidence that the true concentration of the solution is actually not 5 mg/dl.
Answers: 1
Chemistry, 23.06.2019 00:00, alisonsolis155
Before it was launched, a helium-filled balloon had a pressure of 201 kpa at a temperature of 27°c. at an altitude of 15,000 m, the pressure had decreased to 2.5 kpa and the temperature had dropped to -14 °c. the volume of the balloon increased to 59.3 m3. what is the original volume of the balloon? 13 m3 0.85 m3 0.077 m3 1.17 m3
Answers: 3
You know the right answer?
Multi-stage flash distillation is used to desalinate seawater so it is fit for human consumption. a...
Questions in other subjects:
Chemistry, 19.09.2019 18:30
