Business, 08.07.2019 00:30 21megoplin

Keys to preventing a fall from a ladder include choosing the right ladder for the job and tying the top and bottom of the ladder to fixed points. what else can you do to keep safe when using a ladder? a. always keeping both hands on the ladder b. keep your hands free of carrying tools or other materials when climbing a ladder c. make sure you wear safety googles d. never climbing a ladder higher than 4 feet

Answers: 2

Show answers

Answers

Answer from: afosburgh20

Keys to preventing a fall from a ladder include:

choosing the right ladder for the job tying the top and bottom of the ladder to fixed points. keeping your hands free of carrying tools or other materials when climbing a ladder Further Explanation

Ladder is a useful tool specifically in the construction industry. However when it is used incorrectly it can cause injuries and even death. According to OSHA falls from ladders are one of the major causes of occupational injuries and death. The good news is falls can be prevented by planning, providing the right equipment and by training the workers of proper set up and safe use of equipment.

Safety while climbing

One of the goal of the training given for workers for proper set up and safe use of equipment is ensuring the safety of the worker while climbing. The following are some of the safety measures in climbing a ladder:

The three-point rule: When climbing a ladder, always maintain three points of contact when ascending and descending a ladder (two feet, one hand or two hands, one foot) The OSHA standard does not include portable ladders in the six-foot tie-off requirements, but that has not stopped a lot of companies from including it in their best practices. In fact, some companies require tying off when as low as four feet off the ground. Never climb a ladder while carrying tools or equipment. Use a rope to raise and lower tools after you have climbed to the desired height. Lashing: If one ladder is good, then two is not better. Lashing is when two ladders are tied together to reach greater heights. Never do this. Belt buckle rule: Never overextend. Workers always should keep the center of their bodies (belt buckle) between the side rails of the ladder. If they can't safely reach something, they need to climb down, move the ladder and climb back up. Face the ladder: Always climb facing the ladder, wear proper foot wear and make sure all spreader bars and latches are fully locked. Learn more: Safety Data Sheet (SDSs) and Labels Needlestick Safety and Prevention Act Ergonomic hazards

Keywords: ladder, OSHA, safety, occupational safety

Answer from: baileyedavis

The option (B) is correct. A person should keep his hands free of carrying tools or other materials when climbing a ladder for safety.

Further Explanation:

While climbing a ladder, the following things should be kept in mind to prevent the fall:

•The right ladder should be selected for the job

•The ladder should be stable and should not be moving very much.

•The person should not hold anything while climbing the ladder.

•Do not use a broken ladder.

Justification for the correct and incorrect

Always keep both hands on the ladder: This option is incorrect.

Both hands should be kept on the ladder and also should not hold any tool or other material while climbing the ladder to avoid the fall from the ladder.

Keep your hands free of carrying tools or other materials when climbing a ladder: This option is correct.

The person who is climbing the ladder should keep his hands free. He should not hold any tool or other material so that that balance can be maintained on the ladder.

Make sure you wear safety goggles: This option is incorrect.

The person is required to wear safety goggles but keeping the hands free while climbing the ladder is more important as if the balance of the person loses on the ladder it might cause a fall.

Never climb a ladder higher than 4 feet: This option is incorrect.

The person can climb the ladder higher than 4 feet when needed because there is no harm in climbing the ladder more than 4 feet if safety measures are taken.

Learn more:

1.Learn more about the problem-solving strategy

2.Learn more about the decision making strategy

3.Learn more about the activational level

Answer details:

Grade: Senior School

Subject: Business Studies

Chapter: Safety Measures

Keywords: Key, too, preventing, a, fall, from, a ladder, choosing, the, right, ladder, for, the job, tying, the top, and bottom, of the ladder, to fixed points, keep your, hands, free, of carrying, tools or other, materials, when, climbing, a ladder.

Answer from: Quest

answer; ///i believe that the correct answer is (a) it is the means by which a person earns money;

Answer from: Quest

someone i feel is a leader in my life id have to say would be my mother because she has give me great advice in life and got me out of tough situations. some characteristics she has are creativity, honesty, commitment, respect for others, and communication. one example of a situation when she demonstrated leadership was when i was working late on homework and i started to get stressed and got upset, she asked me if i needed some , and she me with my work. she demonstrated communication and commitment.

i don't know if this is exactly what your looking for but i hope this !

Other questions on the subject: Business

Business, 21.06.2019 20:20, alkaline27

Jing-sheng facilitated a hiring committee for his advertising company. six employees (including two managers) met together to discuss applicants and select the finalists for a copywriter position in the public relations department. although the head of public relations would have the final nod on the candidate that would ultimately be hired, the evaluative work of the committee was very important because this group would send forward those persons they believed would be good work colleagues. in setting up this type of hiring process, the head of public relations was utilizing a(n) style of leadership. a. autocraticb. free-reinc. contingentd. participative

Answers: 3

continue

Business, 21.06.2019 23:30, nicollexo21

San ruiz interiors provides design services to residential and commercial clients. the residential services produce a contribution margin of $450,000 and have traceable fixed operating costs of $480,000. management is studying whether to drop the residential operation. if closed, the fixed operating costs will fall by $370,000 and san ruiz’ income will

Answers: 3

continue

Business, 22.06.2019 03:40, Jackson4568

Oceanside marine company manufactures special metallic materials and decorative fittings for luxury yachts that require highly skilled labor. oceanside uses standard costs to prepare its flexible budget. for the first quarter of the year, direct materials and direct labor standards for one of their popular products were as follows: direct materials: 2 pound per unit; $ 11 per pound direct labor: 2 hours per unit; $ 19 per hour oceanside produced 2 comma 000 units during the quarter. at the end of the quarter, an examination of the direct materials records showed that the company used 7 comma 500 pounds of direct materials and actual total materials costs were $ 98 comma 100. what is the direct materials cost variance? (round any intermediate calculations to the nearest cent, and your final answer to the nearest dollar.)

Answers: 1

continue

Business, 22.06.2019 19:30, dominickstrickland

Kirnon clinic uses client-visits as its measure of activity. during july, the clinic budgeted for 3,250 client-visits, but its actual level of activity was 3,160 client-visits. the clinic has provided the following data concerning the formulas to be used in its budgeting: fixed element per month variable element per client-visitrevenue - $ 39.10personnel expenses $ 35,100 $ 10.30medical supplies 1,100 7.10occupancy expenses 8,100 1.10administrative expenses 5,100 0.20total expenses $ 49,400 $ 18.70the activity variance for net operating income in july would be closest to:

Answers: 1

continue

You know the right answer?

Keys to preventing a fall from a ladder include choosing the right ladder for the job and tying the...