Business, 13.10.2020 03:01 Jazzypooh8915

Rick Wing, salesperson for Wave Soldering Systems, Inc. (WSSI), has provided you with a proposal for improving the temperature control on your present machine. The machine uses a hot-air knife to cleanly remove excess solder from printed circuit boards; this is a great concept, but the hot-air temperature control lacks reliability. According to Wing, engineers at WSSI have improved the reliability of the critical temperature controls. The new system still has the four sensitive integrated circuits controlling the temperature, but the new machine has a backup for each. The four integrated circuits have reliabilities of 0.88, 0.90, 0.92, and 0.94. The four backup circuits all have a reliability of 0.88. The overall reliability of the new temperature controller = nothing% (enter your response as a percentage rounded to two decimal places).

Answers: 3

Show answers

Answers

Answer from: coollid876

The answer is "A, B , C, D is now considered a single one".

Explanation:

$\to (A = 0.84) \\\\ \to (B=0.86)\\\\ \to (C = 0.88)\\\\ \to (D =0.90)\\\\$

In the question, the components will be in series throughout or they must both work while the machine operates. The inability of one part fails. ABCD In each adjacent component is assisted and if those modules stop running the system works.

This device for one central ingredient and then one back up becomes perpendicular from each circuit throughout the given problem. For example, Is the device with two adjacent components

Parallel sequence method

Some modules were replicated in parallel here and in sequence. The whole four-circuit welding system is one.

Consistency in parallel systems

The probability each component would fail

The formula for calculating the Probability:

$\text{Probability (single failed component) = 1-(component reliability)}$

Probability (A-key IC component failure)=1-(component reliability)=1-0.84

Probability (B-key IC component failure) = 1-(component reliability) = 1-0.86

Probability (C-key IC component failure) = 1-(component reliability) = 1-0.88

Probability (D-key IC component failure) = 1-(component reliability) = 1-0.90

Probability (backup fails)=1-0.84

Device stable = probability (at least one part works)

Using the approach as a supplement,

P (The function of at least one component)

= 1-Probability (Failure in all parts)

= 1- The result of single potential error probabilities

= 1-[Probability (Main IC-Fails) \times Probability \times (Backup-Fails)]

The Durability of A $=1- [ (1-0.84)(1-0.84)] \\\\$

$= 1- 0.256\\\\=0.9744$

The Durability of B $=1- [ (1-0.86)(1-0.84)]\\$

$=1- [ (0.14)(0.16)]\\\\=1- 0.0224\\\\= 0.9776$

The Durability of C $=1- [ (1-0.88)(1-0.84)]\\\\$

$=1- [ (0.12)(0.16)]\\\\=1- [0.0192]\\\\= 0.9808$

The Durability of D $=1- [ (1-0.90)(1-0.84)]\\\\$

$=1- [ (0.10)(1-0.16)]\\\\= 1- 0.016\\\\=0.984$

Durability of the system sequence

Durability of Device = consumer durability of series components

$=0.9744\times 0.9766 \times 0.9808 \times 0.9840 \\\\=0.9184 \ \ or\ \ 91.84 \% \ \ reliability$

Note:

Any single part A, B , C, D is now considered a single one

Answer from: Quest

Its stage conventional

Answer from: Quest

if it is for a job, then you should learn everything you can about the job, like what does it involve, what qualification is required and how you are the right person for that job. dress appropriately for the interview. get plenty of rest the night before. good luck!

Other questions on the subject: Business

Business, 22.06.2019 01:00, allisonklinger1786

Need with my trade theory homework. i doubt what i wrote was right. consider a monopolistically competitive market for soft drinks in which n symmetric firms face the following demand function: q=s(1/n-b(p-(p with the straight line on which implies the marginal revenue functionmr=p-(q/sb)finally, suppose firms face the total cost functiontc=900,000+100qsuppose the market size, s, is 27,000,000, and the elasticity parameter b is 0.003.diagram the price and the average total cost in the market as a function of the number of firms. what are the equations for each curve, and why does each curve slope up or down? label the equilibrium number of firms and the equilibrium price in the diagram. why is this the equilibrium?

Answers: 1

continue

Business, 22.06.2019 04:00, elijahcraft3

Wallis company manufactures only one product and uses a standard cost system. the company uses a predetermined plantwide overhead rate that relies on direct labor-hours as the allocation base. all of the company's manufacturing overhead costs are fixed—it does not incur any variable manufacturing overhead costs. the predetermined overhead rate is based on a cost formula that estimated $2,886,000 of fixed manufacturing overhead for an estimated allocation base of 288,600 direct labor-hours. wallis does not maintain any beginning or ending work in process inventory.

Answers: 2

continue

Business, 22.06.2019 16:30, nculberson6

Who got instagram! ? if you do give it to me

Answers: 1

continue

Business, 22.06.2019 18:00, ferny5133

Which of the following is a characteristic that can be used to guide the design of service systems? a. services cannot be inventoried. b. services are all similar. c. quality work means quality service. d. services businesses are inherently entrepreneurial. e. even service businesses have internal services.

Answers: 2

continue

You know the right answer?

Rick Wing, salesperson for Wave Soldering Systems, Inc. (WSSI), has provided you with a proposal for...